Project

General

Profile

ТР-9 Техническая спецификация

MIC INPUTS
Input Impedance 1.5kohms, electronically balanced  
Input Balance Typically> 60dB @ 1kHz  
Gain adjustment range 20 to 60dB (Preset) +/-12dB (User)  
Maximum input (for onset of clip) 0dB at 20dB gain, fader at 0dB  
  -21dB at 45dB gain, fader at 0dB  
  -46dB at 70dB gain, fader at 0dB  
THD @ +18dB @ any output <0.03% 100Hz-10kHz at any gain setting, gain trim at 0dB, fader at 0dB
Frequency Response, any output +/-0.5dB (DYN, EQ and filters OUT) 40 – 16kHz  
Offness, any output, 100Hz-10kHz >90dB, with either fader down, or Channel OFF, or bus-de-routed
Noise <-82dB at 20dB gain, fader at 0dB, rms 20-20kHz, 150R source  
  <-75dB at 45dB gain, fader at 0dB, rms 20-20kHz, 150R source  
  <-56dB at 70dB gain, fader at 0dB, rms 20-20kHz, 150R sourc  
       
ANALOG LINE INPUTS
Input Impedance >10kohms, electronically balanced  
Input Balance Typically> 60dB @ 1kHz  
Gain adjustment range -32 to +20dB (Preset) +/-12dB (User)  
Maximum input (for onset of clip) +24dB at 0dB gain, fader at 0dB  
THD @ +18dB @ any output <0.03% 100Hz-10kHz at any gain setting, fader at 0dB  
Frequency Response, any output +/-0.5dB (DYN, EQ and filters OUT), 20-20kHz  
Offness, any output, 100Hz-10kHz >90dB, with either fader down, or Channel OFF, or bus-de-routed
Left-Right Crosstalk (stereo channels) <-90dB 100Hz-10kHz  
Noise <-80dB at 0dB gain, fader at 0dB, rms 20-20kHz, 150R source
       
AES INPUTS
Data Format IEC958, AES3    
Gain Control Range +/-10dB (User)  
Input Signal Range 200mV to 7V Peak    
Input Impedance 110ohms  
SRC  24bit    
       
EQUALISATION (Mic and TBU Inputs)
LF Band Boost/Cut: +/-10dB  Frequency Range: 20Hz – 300Hz  Q: 0.5 – 2
MF Band  Boost/Cut: +/-10dB Frequency Range: 400Hz – 5kHz  Q: 0.5 – 2.5
HF Band  Boost/Cut: +/-10dB  Frequency Range: 8kHz – 12kHz  Q: 0.5 – 2
High Pass Filter    Frequency Range: 20Hz – 200Hz  
       
DYNAMICS PROCESSING (Mic and TBU Inputs)
Compressor Threshold -40dB to 0dB    
Compressor Ratio 1:1 (out) to 20:1 (hard limit)  
Compressor Attack Time  0.4mSec to 120mS    
Compressor Decay Time 50mS to 10 seconds  
Limiter Threshold 0dB to +30dB    
Limiter Decay Time  50mS to 10 seconds  
       
ANALOG LINE OUTPUTS
Output Impedance <50ohms    
Output Balance Typically >55dB at 1kHz  
Maximum Output >+24dB, no load    
Output Noise, any output  <-80dB, no inputs routed, rms, 20-20kHz  
       
AES OUTPUTS
Output Impedance  110ohms    
Gain adjust +/- 12dB  
       
HEADPHONE OUTPUTS
Headphone Impedance Nominally 32ohms    
Frequency Response 40Hz – 15kHz +/-0.5dB  
Maximum Output +8dBU (at onset of distortion)  
       
DYNAMICS PROCESSING (Main program outputs)
Limiter Threshold  0dB to +40dB    
Limiter Decay  50mS to 10 seconds    
       
POWER
Mains Input 100V t0 240V 50/60Hz    
Power Consumption Approximately  60W  
Mains Fuse 2A H    
       
PHYSICAL
Weight 6kg (excluding packing and any option modules)  
Front Panel 3RU  
Depth 450mm (excluding connectors)  
Add picture from clipboard (Maximum size: 645 MB)